BEEP CODES untuk ANALISA :) Silahkan ditambahkan jika ada yg lainnya

Saya kutip dari berbagai sumber, silahkan jika anda memiliki informasi
lebih mengenai Beep Code yg bisa digunakan untuk menganalisa
permasalahan pada CPU

Beep
biasanya muncul ketika kita menyalakan CPU, kadang sebagian dari kita,
mengabaikan suara beep ini; ternyata Beep juga memiliki code yg bisa
kita jadikan pegangan untuk melakukan analisa sebuah permasalahan


Standard
Original IBM POST Error Codes

1
short beep Normal POST - system is ok
2 short beeps POST
Error - error code shown on screen

No beep Power supply
or system board problem
Continuous beep Power supply, system
board, or keyboard problem
Repeating short beeps Power supply
or system board problem
1 long, 1 short beep System board
problem
1 long, 2 short beeps Display adapter problem (MDA,
CGA)
1 long, 3 short beeps Enhanced Graphics Adapter (EGA)
3
long beeps 3270 keyboard card

[You must be registered and logged in to see this image.]

IBM POST Diagnostic Code Descriptions

100 -
199 System Board
200 - 299 Memory
300 - 399
Keyboard
400 - 499 Monochrome Display
500 - 599
Color/Graphics Display
600 - 699 Floppy-disk drive and/or
Adapter
700 - 799 Math Coprocessor
900 - 999
Parallel Printer Port
1000 - 1099 Alternate Printer Adapter
1100
- 1299 Asynchronous Communication Device, Adapter, or Port
1300
- 1399 Game Port
1400 - 1499 Color/Graphics Printer
1500
- 1599 Synchronous Communication Device, Adapter, or Port
1700
- 1799 Hard Drive and/or Adapter
1800 - 1899 Expansion
Unit (XT)
2000 - 2199 Bisynchronous Communication Adapter
2400
- 2599 EGA system-board Video (MCA)
3000 - 3199 LAN
Adapter
4800 - 4999 Internal Modem
7000 - 7099
Phoenix BIOS Chips
7300 - 7399 3.5" Disk Drive
8900 -
8999 MIDI Adapter
11200 - 11299 SCSI Adapter
21000
- 21099 SCSI Fixed Disk and Controller
21500 - 21599
SCSI CD-ROM System

[You must be registered and logged in to see this image.]

AMI BIOS Beep Codes

1 Short Beep One beep is good! Everything is ok, that is if
you see things on the screen. If you don't see anything, check your
monitor and video card first. Is everything connected? If they seem
fine, your motherboard has some bad chips on it. First reset the SIMM's
and reboot. If it does the same thing, one of the memory chips on the
motherboard are bad, and you most likely need to get another motherboard
since these chips are soldered on.

2 Short Beeps Your
computer has memory problems. First check video. If video is working,
you'll see an error message. If not, you have a parity error in your
first 64K of memory. First check your SIMM's. Reseat them and reboot. If
this doesn't do it, the memory chips may be bad. You can try switching
the first and second banks memory chips. First banks are the memory
banks that your CPU finds its first 64K of base memory in. You'll need
to consult your manual to see which bank is first. If all your memory
tests good, you probably need to buy another motherboard.

3
Short Beeps Basically the same thing as 2 beeps. Follow that
diagnosis above.

4 Short Beeps Basically the same thing
as 2 beeps. Follow that diagnosis above. It could also be a bad timer

5
Short Beeps Your motherboard is complaining. Try reseating the
memory and rebooting. If that doesn't help, you should consider another
motherboard. You could probably get away with just replacing the CPU,
but that's not too cost-effective. Its just time to upgrade!

6
Short Beeps The chip on your motherboard that controls your
keyboard (A20 gate) isn't working. First try another keyboard. If it
doesn't help, reseat the chip that controls the keyboard, if it isn't
soldered in. If it still beeps, replace the chip if possible. Replace
the motherboard if it is soldered in.

7 Short Beeps Your
CPU broke overnight. Its no good. Either replace the CPU, or buy another
motherboard.

8 Short Beeps Your video card isn't
working. Make sure it is seated well in the bus. If it still beeps,
either the whole card is bad or the memory on it is. Best bet is to
install another video card.

9 Short Beeps Your BIOS is
bad. Reseat or Replace the BIOS.

10 Short Beeps Your
problem lies deep inside the CMOS. All chips associated with the CMOS
will likely have to be replaced. Your best bet is to get a new
motherboard.

11 Short Beeps Your problem is in the Cache
Memory chips on the motherboard. Reseat or Replace these chips.

1
Long, 3 Short Beeps You've probably just added memory to the
motherboard since this is a conventional or extended memory failure.
Generally this is caused by a memory chip that is not seated properly.
Reseat the memory chips.

1 Long, 8 Short Beeps Display /
retrace test failed. Reseat the video card.

[You must be registered and logged in to see this image.]

Phoenix BIOS Beep
Codes

These audio codes are a
little more detailed then the AMI codes. This BIOS emits three sets of
beeps. For example, 1 -pause- 3 -pause 3 -pause. This is a 1-3-3 combo
and each set of beeps is separated by a brief pause. Listen to this
sequence of sounds, count them, and reboot and count again if you have
to.


1-1-3 Your computer can't read the configuration info
stored in the CMOS. Replace the motherboard.

1-1-4 Your BIOS
needs to be replaced.

1-2-1 You have a bad timer chip on the
motherboard. You need a new motherboard.

1-2-2 The motherboard
is bad.

1-2-3 The motherboard is bad.

1-3-1 You'll
need to replace the motherboard.

1-3-3 You'll need to replace
the motherboard.

1-3-4 The motherboard is bad.

1-4-1
The motherboard is bad.

1-4-2 Some of your memory is bad.

2-_-_
Any combo of beeps after two means that some of your memory is bad,
and unless you want to get real technical, you should probably have the
guys in the lab coats test the memory for you. Take it to the shop.

3-1-_
One of the chips on your motherboard is broken. You'll likely need to
get another board.

3-2-4 One of the chips on your motherboard
that checks the keyboard is broken. You'll likely need to get another
board.

3-3-4 Your computer can't find the video card. Is it
there? If so, try swapping it with another one and see if it works.

3-4-_
Your video card isn't working. You'll need to replace it.

4-2-1
There's a bad chip on the motherboard. You need to buy another board.

4-2-2
First check the keyboard for problems. If nothing, you have a bad
motherboard.

4-2-3 Same as 4-2-2.

4-2-4 One of the
cards is bad. Try yanking out the cards one by one to isolate the
culprit. Replace the bad one. The last possibility is to buy another
motherboard.

4-3-1 Replace the motherboard.

4-3-2 See
4-3-1

4-3-3 See 4-3-1

4-3-4 Time of day clock failure.
Try running the setup program that comes with the computer. Check the
date and time. If that doesn't work, replace the battery. If that
doesn't work, replace the power supply. You may have to replace the
motherboard, but that is rare.

4-4-1 Your serial ports are
acting up. Reseat, or replace, the I/O card. If the I/O is on the
motherboard itself, disable them with a jumper (consult your manual to
know which one) and then add an I/O card.

4-4-2 See 4-4-1, but
this time is your Parallel port that's acting up.

4-4-3 You math
coprocessor is having problems. Run a test program to double-check it.
If it is indeed bad, disable it, or replace it.

Low 1-1-2 Your
motherboard is having problems

Low 1-1-3 This is an Extended
CMOS RAM problem, check your motherboard battery, and motherboard.

[You must be registered and logged in to see this image.]

untuk standaran pc yg banyak beredar di kita :

3x / 4x beep (
tergantung biosnya ) = biasanya vga card bermasalah / memory tdk
compatible bagi pengguna vga on board

loong / continous beep =
memory bermasalah / mati

short beep continously = processor
bermasalah

[You must be registered and logged in to see this image.]

NAMBAHIN

arti suara "beep"
yang biasa terjadi pada smua bios

1.
1 short beep = System is ok
2. 2 short beeps = BIOS
error
3. 1 long and 8 short beeps = Display Card error
4.
1 long beep after few seconds 2 short beeps = FDC error
5. 1
long beep after few seconds 1 short beeps = FDC is Ok
6. 1
long beep and 2 short beeps = Display Card Error
7. Continuous
long beeps = RAM error


[You must be registered and logged in to see this image.]

Award BIOS Beep
Code Troubleshooting

1
Short Beep
= A single, short beep from an Award based BIOS is
actually an "all systems clear" notification. In other words, this is a
beep code you want to hear and that you've probably been hearing each
time your computer comes on since the day you purchased it. No
troubleshooting necessary!

1 Long Beep, 2 Short Beeps
=
One long beep followed by two short beeps indicates that there has been
some kind of error with the video card. Replacing the video card is
usually the most you'll have to do to fix this one.

1 Long
Beep, 3 Short Beeps
= One long beep followed by three short beeps
means that either the video card isn't installed or the memory on the
video card is bad. Reseating or replacing the video card will typically
fix the cause of this Award beep code.

1 High Pitched Beep, 1
Low Pitched Beep (Repeating)
= A repeating high pitched / low
pitched beep pattern is an indication of some kind of CPU problem. The
CPU could be overheating or malfunctioning in some other way.

1
High Pitched Beep (Repeating)
= A single, repeating, high
pitched beeping sound means that the CPU is overheating. You'll need to
figure out why the CPU is getting too hot before this Award beep code
will go away.
Important: Turn your computer off immediately
if you hear this beep code. The longer your CPU is running hot, the
higher the chance that you'll permanently damage this expensive part of
your system.

All Other Beep Codes
= Any other beep
code pattern you hear means that there has been some kind of memory
problem. Replacing your RAM is the most you'll need to do to fix this
problem.

Beep codes on
CompTIA A+ Hardware Core exam

Steady,
short beeps
= Power supply may be bad

Long continuous
beep tone
= Memory failure

Steady, long beeps
=
Power supply bad

No beep
= Power supply bad, system not
plugged in, or power not turned on

No beep
= If
everything seems to be functioning correctly there may be a problem with
the 'beeper' itself.

One long, two short beeps
= Video
card failure

Macintosh beep
codes

Apple's Macintosh
computers also perform a POST after a cold boot. In the event of a fatal
error, the Mac will not make its startup chime.

√ Old World
Macs (until 1998)

Macs made prior to 1998, upon failing the
POST, will immediately halt with a "death chime," which is a sound that
varies by model; it can be a beep, a car crash sound, the sound of
shattering glass, a short musical tone, or more. On the screen will be
the Sad Mac icon, along with two hexadecimal strings, which can be used
to identify the problem.

√ New World Macs (1998-1999)

When
Apple introduced the iMac in 1998, it was a radical departure from
other Macs of the time. The iMac began the production of New World Macs,
as they are called; New World Macs, such as the iMac, Power Macintosh
G3 (Blue & White), Power Mac G4 (PCI Graphics), PowerBook G3 (bronze
keyboard), and PowerBook G3 (FireWire), load the Mac OS ROM from the
hard drive. In the event of a fatal error, they give these beeps

* 1 beep = No RAM installed/detected
* 2 beeps =
Incompatible RAM type installed (for example, EDO)
* 3 beeps = No
RAM banks passed memory testing
* 4 beeps = Bad checksum for the
remainder of the boot ROM
* 5 beeps = Bad checksum for the ROM
boot block

√ New World Macs (1999 onward) and Intel-based
Macs

The beep codes were revised in October 1999, and have
been the same since. In addition, on some models, the power LED would
flash in cadence.

* 1 beep = no RAM installed
* 2
beeps = incompatible RAM types
* 3 beeps = no good banks
*
4 beeps = no good boot images in the boot ROM (and/or bad sys config
block)
* 5 beeps = processor is not usable